| Description |
12 Ton 4 Pillar Type Vertical Downward Clamping, Horizontal Injection adjustable nozzle In Vertical Axis 4-Pillartype, Semi- Automatic Hydraulic Wax Injection Press. |
| Daylight |
400mm |
| Admit Between Pillars |
400 mm x 400 mm |
| Nozzle Tip |
10 mm Spherical Radius |
| Single Shot |
2000 cc |
| Table |
1 Meter From Floor, Service Table Projection 400 mm, Deep Along The Full Width of the Machine. |
| Dwell Time |
0-999 seconds |
| Melting Tank |
30 Lit Capacities with Motorized Stirrer, Slip Coupling, Drain Valve, Annular Tube Type Reservoir and Triple Band Heater. |
| Temp. Control |
Independent Digital Display Of Tank And Block Temperature, Sunvik Type Controller for Nozzle Heater. |
| Safety precautions |
Dual Push Button For Cycle Start, Temp interlock with Hydraulic& Mixer Start alarm setting for emergency push Button & Nozzle Safety Strike. |
| Auto-Sequence |
Push To Start-Clamp Down-Suction Of Wax-Nozzle forward-Injection-Nozzle Return-Clamp Up-Surplus Wax to Tank. |
| Motor |
5 Hp,1440rpm,Crompton Greaves/ABB. |
| Pump Make |
Yuken |
| Color |
Machine electrical panel door and cover - Advait grey with Powder coat, Machine basic color - Advait White. |
| Die Mounting |
T-Slot In Moving And Bottom Platen. |
| Approximate Weight |
1500 Kg |
| Machine Total Power |
5 Kw |